Description
TACKWHITE AR 9 is a removable p.s. adhesive, based on 100% acrylic polymers in water dispersion, properly modified with additives and wetting agents which produce a very good tack and wettability of any surface, combined with a very consistent removability.
Application
TACKWHITE AR 9 allows the production of removable and replaceable paper labels and stickers (adhesivity will be similar to "post-it" adhesives).
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 56±2 |
| 8 | pH | pH | 7 - 9 |
| Solvents | water | ||
| 3 | Brookfield Viscosity 25°C | mPa.s | |
| • | TACKWHITE AR9 | 500 - 1,5001 | |
| • | TACKWHITE AR9 (V1) | 12,000 - 22,0002 | |
| • | TACKWHITE AR9 (V1/2) | 6,000 - 12,0002 | |
| • | TACKWHITE AR9 (V2) | 17,000 - 27,0003 | |
| Notes | |||
| 1 | N. 2 RV; 20 RPM | ||
| 2 | N. 5 RV; 20 RPM | ||
| 3 | No 6 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 50 |
| 17 | Rolling Ball Tack | cm | 5 |
| 22 | Static Shear | h | not applicable |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
Advised quantity: 15-25 g dry/sqm, according to paper porosity.
If coated on a plastic film, usual quantity applied should be approx. 10 g dry/sqm.
It can be coated by:
- Meyer bar, viscosity 500 to 1,500 cps
- Reverse roll, 5,000 to 8,000 cps
- Rotating knife, over 12,000 cps
Packaging
TACKWHITE AR 9 is supplied in 1,000 kg tank containers or 200 kg drums.
Storing
TACKWHITE AR 9 storage temperature must be between +5°C and +40°C (41-104°F); avoid freezing conditions.
| Mod. DT3002E | Creation date: 2/20/1996 | Revision: 6 | Revision date: 6 Oct 2004 |
Above information is reliable, but does not constitute warranty.
