TACKWHITE A 2P 60 is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Once dried, it produces a transparent film.
It has a high solids content and a good resistance to light, ageing, water and solvents.
Tg is about -40°C.
TACKWHITE A 2P 60 allows the production of pressure sensitive articles with good tack, good adhesion, good water and low temperatures resistance.
Method of analysis | MU | Standard | |
---|---|---|---|
1 | Total Solids | % | 55±2 |
8 | pH | pH | 6 - 8 |
Solvents | water | ||
3 | Brookfield Viscosity 25°C | mPa.s | |
• | TACKWHITE A2P/60 | 600 - 9001 | |
• | TACKWHITE A2P/60 (V) | 4,000 - 5,0002 | |
• | TACKWHITE A2P/60 (V2) | 17,000 - 27,0003 | |
Notes | |||
1 | N. 2 RV; 20 RPM | ||
2 | No 3 RV; 20 RPM | ||
3 | No 6 RV; 20 RPM |
Method of analysis | MU | Standard | |
---|---|---|---|
11 | Peel Adhesion on Steel | g/in | 2,000 |
17 | Rolling Ball Tack | cm | 10 |
22 | Static Shear | h | > 1 |
97 | Loop Tack Test | g | 1,200 |
Average values; 22±2 g/m² of dry adhesive on PET film 36 µm |
TACKWHITE A 2P 60 can be directly coated on PVC and plasticized PVC, PE, PP, fabrics. It can be applied by reverse roll, knife coating etc.
It can be modified with acrylic plasticizers, acrylic thickeners, plasticizers (like DOP, etc.), solvents, fillers.
Product must be stored at temperatures between +5°C and +40°C. Protect from freeze.
Mod. DT3002E | Creation date: 5/27/1997 | Revision: 7 | Revision date: 15 Jun 2016 |