Description
TACKWHITE A 33 is a pure, water borne acrylic p.s.a. It is a permanent adhesive, suitable for transparent labels, tapes and any pressure sensitive article where a good resistance to the exposure to light is required.
Application
TACKWHITE A 33 is used mainly for permanent label production (paper and film) or foams.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 51±2 |
| 8 | pH | pH | 8 - 10 |
| Solvents | water | ||
| 3 | Brookfield Viscosity 25°C | mPa.s | |
| • | TACKWHITE A 33 | 200 - 5001 | |
| • | TACKWHITE A 33 (V1) | 12,000 - 22,0002 | |
| Notes | |||
| 1 | No 1 RV; 20 RPM | ||
| 2 | N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,200 |
| 22 | Static Shear | h | > 50 |
| 97 | Loop Tack Test | g | 800 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
The product can be applied by traditional coating method: Mayer bar, reverse roll,... Coating weight depends on the final application, usually it is between 15 and 25 g/sqm dry.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
TACKWHITE A 33 must be stored at temperatures between +5°C and +40°C.
Use within 6 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 1/8/1996 | Revision: 9 | Revision date: 16 Jun 2020 |
Above information is reliable, but does not constitute warranty.
