Technical data sheet

Primer Unisol 20

Description

PRIMER UNISOL 20 is a high concentration solvent based primer based on special elastomers and resins.

Application

PRIMER UNISOL 20 is designed to improve anchorage of natural rubber adhesives on PET, PE and PP.

Technical Specifications

Method of analysisMUStandard
1Total Solids% 20±1
3Brookfield Viscosity 25°CmPa.s 5,000 - 10,0001
 Solventstoluene / ethylacetate
 Notes
1N. 5 RV; 20 RPM

Handling

The product must be diluted with toluene to a TS value of 10% and well stirred. 

PRIMER UNISOL 20 must be cured with polyisocyanate before application: mix 100 w/w of PRIMER UNISOL (diluted at 10%) with 0,7 - 1 w/w of CURING AGENT D and coat with approx 5-8 g wet/sqm by reverse roll/gravure/Meyer bar. Pot life is reduced, as crosslinking starts immediately after the addition of isocyanate.

Packaging

The product is supplied in iron drums (180 kg).

Storing

The product must be stored at temperatures lower than +40°C. Keep away from direct sunlight. Keep containers tightly closed to prevent solvent evaporation.

Use within 12 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 12/23/2009Revision: 4Revision date: 29 Aug 2016
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
ISO 9001 14001 45001 Certified Management