RELEASE W 20 g is a water-based release agent based on acrylic polymers added with special releasing agents.
RELEASE W 20 G is suggested for hot-melt and solvent based adhesives.
The product has been designed as a release agent for porous substrates, like Kraft paper, and it gives excellent release and unwinding properties.
Method of analysis | MU | Standard | |
---|---|---|---|
Solvents | water | ||
1 | Total Solids | % | |
• | RELEASE W20 G | 20±1 | |
3 | Brookfield Viscosity 25°C | mPa.s | |
• | RELEASE W20 G | 800 - 1,2001 | |
8 | pH | pH | |
• | RELEASE W20 G | 7 - 9 | |
Notes | |||
1 | N. 2 RV; 20 RPM |
Quantity to apply: it depends on substrate porosity: from 1 to 3 g dry/sqm.
Methods: Mayer bar, Reverse Roll, Roto gravure, Air knife.
It can be either thickened (acrylic thickeners) or diluted (water).
It is advised to heat the product for a few seconds at 150°C in order to achieve the highest properties of releasing (there is a process of self-curing)
Ageing properties are excellent.
RELEASE W 20 G is supplied in 200 l plastic drums or 1000 l tanks.
Keep material at temperatures between +5°C and +40°C, avoid direct sunlight/freezing.
When stored for over one month, it is necessary to stir slowly the product for 10 - 15 minutes before use.
Shelf life is 3 months.
Mod. DT3002E | Creation date: 4/19/2002 | Revision: 1 | Revision date: 19 Apr 2004 |