Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Release W 40 S |
Description
RELEASE W 40 S is a water-based release agent based on synthetic SBR polymers added with releasing agents.
Application
RELEASE W 40 S has been designed as a release agent for porous substrates, like Kraft paper, Masking papers, non wovens, fabrics, which are supposed to be in contact with hot-melt and solvent adhesives.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 40±1 |
| 3 | Brookfield Viscosity 25°C | cps | 1,000 - 3,0001 |
| 8 | pH | pH | 8 - 10 |
| Solvents | water | ||
| Notes | |||
| 1 | No 3 RV; 20 RPM | ||
Handling
Quantity to apply depends on substrate porosity: from 2 to 4 g dry/sqm (on coated paper we suggest 3 g dry/sqm). Methods: Meyer bar, Reverse Roll, Roto gravure, Air knife.
It can be either thickened (acrylic thickeners) or diluted.
It is advised to heat the product for a few seconds at 150°C in order to achieve the highest properties of releasing. However results are good (but inferior) also at lower temperatures. Ageing properties are excellent.
Packing
RELEASE W 40 S is supplied in 200 l plastic drums or 1000 l tanks.
Storing
Keep material at temperatures between +5°C and +40°C, avoid direct sunlight
When stored for over one month it is necessary to stir product for 10 - 15 minutes before use.
Shelf life is 3 months.
Notes
Viscosity can be increased, according to the adapted coating system..