TACKMELT HM 15 A is a hot-melt adhesive based on thermoplastic rubbers elastomers (SIS) and synthetic resins. Special synergistic antioxidants are added to guarantee the best ageing resistance.
TACKMELT HM 15 A shows very high tack and peel adhesion values, with excellent cohesion.
The product can be used for the production of double-sided adhesive tapes and for the lamination of insulating foams and panels.
Method of analysis | MU | Standard | |
---|---|---|---|
4 | Softening Point, Ring & Ball | °C | 100 - 110 |
108 | Viscosity at 170°C | mPa.s | 20,000 - 50,000 |
Method of analysis | MU | Standard | |
---|---|---|---|
10 | Peel Adhesion on Steel | N/in | 39 |
17 | Rolling Ball Tack | cm | 30 |
96 | S.A.F.T.1 | °C | 97 |
125 | Loop Tack | N | 25 |
Notes | |||
1 | based on ASTM D4498-00 | ||
Average values; pilot plant coating at 4 m/min; 30±3 g/m² on PET film 23 µm, TCA-treated |
TACKMELT HM 15 A must be heated to 150-170°C with a suitable heating equipment and kept at a set stable temperature while coating (temperature changes cause a variation of the viscosity and, consequently, of the processing condition).
The best coating system is slot-die.
The product has been designed to withstand high temperature, but it is preferable to avoid thermal shocks.
The product is supplied in 150g pillows packed in cardboard boxes (20 kg); fibre drums (180 kg).
Keep the product at temperatures lower than +25°C. Avoid contact with dust and liquids. Keep far from heat sources and direct sunlight.
Use within 12 months from production date (unopened and in the original packaging).
The product, once coated, is subject to oxidation from air and light and must be protected in order not to compromise its performance.
Shelf life of TACKMELT HM 15 A packed in pillows is 3 months. Shelf life of TACKMELT HM 15 A packed in fibre drums (180 kg) is 12 months.
Mod. DT3002E | Creation date: 4/30/2010 | Revision: 10 | Revision date: 6 Feb 2018 |