Description
RELEASE W40 GB1 is a water-based release agent based on acrylic polymers added with special releasing agents.
Application
RELEASE W40 GB1 is suggested for hot-melt and solvent based pressure sensitive adhesives.
The product has been designed as a release agent for porous substrates, like Kraft paper, giving excellent release and unwinding properties.
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 40±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 800 - 1,200 |
| 8 pH | pH | 8 - 9 |
| Solvents | water | |
| 1 N. 2 RV; 20 RPM | ||
| Method of analysis | MU | Standard |
|---|
Handling
Coating methods: Mayer bar, Reverse Roll, Roto-gravure, Air knife. The quantity to apply depends on the substrate porosity, normally ranging from 1 to 3 g dry/sqm. The product can be either thickened (acrylic thickeners) or diluted (water).
In order to obtain the highest releasing properties, we recommend to heat the product at 150°C for a few seconds. A self-curing process is triggered after the drying.
Ageing properties of the film are excellent.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1060 kg).
Storing
Keep material at temperatures between +5°C and +40°C; avoid direct sunlight/freezing.
The product tends to stratify, so it must be stirred slowly for 10 - 15 minutes before use.
Use within 9 months from production date (unopened and in the original packaging).