Description
TACKSOL 10/85 HST is a high performance solvent borne pressure sensitive adhesive, based on natural and synthetic rubbers and special resins. It has an exceptional resistance to ageing, light and heat, much more compared to other products based on natural rubbers only.
Application
TACKSOL 10/85 HST can be applied on any substrate (paper, PET, PP, PE, PVC).
Production: protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 25±2 |
| 3 Brookfield Viscosity 25°C | mPa.s | 15000 - 30000 |
| Solvents | toluene / hexane | |
| 1 No 6 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 900 |
| 17 Rolling Ball Tack | cm | 4 |
| 97 Loop Tack Test | g | 1,200 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
In order to increase thermal or mechanical resistance, it is necessary to cure the product with isocyanate (e.g. CURING AGENT D or CURING AGENT RF/AEDE), in this case the pot-life of the adhesive is reduced, as crosslinking starts immediately after the addition of the curing agent. The amount of isocyanate depends on the final characteristics required.
Packaging
The product is supplied in iron drums (145 kg).
Storing
Use within 12 months from production date (unopened and in the original packaging).