Description
SOLACRIL 44 TF is a solvent borne acrylic pressure sensitive adhesive. It is toluene free. Very clear, it has good tack and high peel adhesion.
Application
SOLACRIL 44 TF is suitable for application on plastic materials, such as PP, PE, PET, acetate, etc., and on various substrates like paper, PU foams, fabrics, non woven, synthetic leather, etc.
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 50±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 5,000 - 10,000 |
| Solvents | ethylacetate / isopropyl alcohol | |
| 1 N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 1,200 |
| 17 Rolling Ball Tack | cm | > 20 |
| 97 Loop Tack Test | g | 700 |
| 1 without crosslinker | ||
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
The product is ready to use and can be applied with traditional coating systems: rotating blade or reverse roll. Diluted, it can be applied by Mayer bar, rotogravure.
If a crosslinker has been added, a perfect drying is necessary to fully complete the crosslinking process.
Packaging
The product is supplied in iron drums (180 kg).
Storing
Store in a cool place, protected from direct sunlight and heat sources, at temperatures between +5 and +40°C. Keep material in tightly closed containers to prevent loss of solvent.
Use within 12 months from production date (unopened and in the original packaging).