Description
TACKSOL 10/86 HTC is a solvent borne pressure sensitive adhesive, based on natural rubber and special resins. It has a good wettability on various substrates.
Application
TACKSOL 10/86 HTC can be applied on any substrate (paper, PET, PP, PE, PVC).
It is a soft adhesive and is recommended for the production of protective p.s. films and tapes with low gsm values.
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 30±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 1,000 - 2,500 |
| Solvents | hexane | |
| 1 No 2 RV; 10 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 17 Rolling Ball Tack | cm | 1 |
| N/in | 3.5 | |
| N | 4.5 | |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
TACKSOL 10/86 HTC can be diluted with aliphatic and aromatic solvents in order to achieve the desired viscosity. For protective tapes, the product must be cured with CURING AGENT D (0.5-1%). Reaction starts immediately, thus we recommend to use the product immediately after the activation. The crosslinking mechanism depends on different parameters, such as adhesive concentration, amount of crosslinker, temperature. We suggest to check in advance the curing conditions, in order to avoid to spoil material.
Packaging
The product is supplied in iron drums (145 kg).
Storing
Use within 12 months from production date (unopened and in the original packaging).