Description
TACKWHITE AK 11 is a water borne pressure sensitive adhesive based on acrylic polymers.
It has a very good anchorage on corona treated polyolefin films.
The coated product has a very high resistance to plasticizers and its adhesive properties are stable after ageing.
Application
TACKWHITE AK 11 is suggested for the production of film labels.
Technical Specifications
| Method of analysis | UoM | Standard |
|---|---|---|
| 1 Total Solids | % | 50±1 |
| 8 pH | 7 - 8 | |
| Solvents | water | |
| 3 Brookfield Viscosity 25°C | mPa.s | |
|
TACKWHITE AK 11
|
150 - 400 1 | |
|
TACKWHITE AK 11 (V500)
|
400 - 550 1 | |
| 1 No 1 RV; 20 RPM | ||
Film properties
| Method of analysis | UoM | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 1,000 |
| 17 Rolling Ball Tack | cm | 6 |
| 22 Static Shear | h | > 50 |
| 97 Loop Tack Test | g | 900 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
The product can be applied by Mayer bar or reverse roll.
If necessary, it can be thickened with a suitable acrylic based thickener.
Packaging
The product is supplied in plastic drums (225 kg); IBC containers (1050 kg).
Storing
TACKWHITE AK 11 must be stored at temperature between +5°C and +30°C.
Protect from freeze.
Use within 6 months from production date (unopened and in the original packaging).
Above information is reliable, but does not constitute warranty.
For the most up to date information and technical data sheets, please visit our web site: www.ichemco.it