Description
Application
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 42±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 140000 - 200000 |
| Solvents | hexane | |
| 1 No 7 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 1,500 |
| 22 Static Shear | h | > 10 |
| 97 Loop Tack Test | g | 1,500 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
TACKSOL 45 TR M can be applied directly on the substrate by air knife, so to avoid penetration of the adhesive into the substrate.
Thermal and mechanical resistance can be increased by adding 0.5% - 1 % of CURING AGENT D or CURING AGENT CH. Reaction starts immediately, so it is recommended to use the product after the activation. Pot-life of TACKSOL 45 TRM + crosslinker depends on crosslinker quantity and temperature. We suggest to check in advance curing conditions, in order to avoid any waste.
Packaging
The product is supplied in iron drums (150 kg).
Storing
The product must be stored between +5°C and +30°C, far from heat sources. Keep containers well closed in order to prevent solvent evaporation.
Use within 12 months from production date (unopened and in the original packaging).