Technical data sheet

Release ST6 Dry

Description

RELEASE ST6 DRY is a dry blend of synthetic resins, soluble in toluene/isopropyl alcohol.
When applied on the backside of corona treated and untreated polyolephinic films, the product allows to obtain a good printability together with a good releasing effect. Primer is not necessary.
The adhesive tape can be printed directly with polyamidic inks, with a one step process.

Application

Polyolephinic self-adhesive tapes.
Tapes with RELEASE ST6 DRY can be easily printed in one step process, as for PVC tapes. Inks to be used: polyamidic. Heated rolls are not necessary.

Technical Specifications

Method of analysisMUStandard
1Total Solids% 100±0.50

Handling

RELEASE ST6 DRY must be dissolved in a mixture of toluene/isopropyl alcohol (70/30).
It is suggested to prepare a concentrated solution (20-30%) by stirring and heating at 40°C, then add solvents to a dilution of approx 10%. Before the application, you bring  dilution down to 1,5-2 % (coating concentration). Suggested coating weight: 4-6 g/sqm wet
Stir the product well  before use.

Packaging

5-10 kg bag. Each bag must be used completely without splitting its content.

Storing

Shelf life is 12 months at normal temperatures (+10 +40°C).

Use within 24 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 10/9/2007Revision: 2Revision date: 25 May 2009
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1
- www.ichemco.it
ISO 9001 14001 45001 Certified Management