Description
TACKWHITE A 22 RP is a waterborne pressure sensitive adhesive, based on acrylic polymers.
The coated product has a very high resistance to plasticizers and humidity. It can be classified as a permanent adhesive.
Application
TACKWHITE A 22 RP is designed for the production of labels in plastic film (especially PPVC).
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 51±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 10 - 250 1 |
| 8 pH | pH | 5 - 7 |
| Solvents | water | |
| 1 No 1 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 1,300 |
| 17 Rolling Ball Tack | cm | 10 |
| 22 Static Shear | h | > 100 |
| 97 Loop Tack Test | g | 1,200 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
The product can be applied by Mayer bar or reverse roll.
If necessary, it can be thickened with a suitable acrylic based thickener.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
TACKWHITE A 22 RP must be stored at temperature between +5°C and +40°C.
Protect from freeze.
Use within 6 months from production date (unopened and in the original packaging).
Above information is reliable, but does not constitute warranty.