Description
FLAMERETARDER HWF is an halogen free flame retardant, based on nitrogen and phosphorous compounds.
It doesn't contain formaldeyde.
Application
The product is suitable for natural fibers.
It has a very good resistance to yellowing (no yellowing underneath 150°C).
FLAMERETARDER HWF has no influence on the handle and mechanical properties of the substrate.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 46±2 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 10 - 501 |
| 8 | pH | pH | 7 - 8 |
| Solvents | water | ||
| Notes | |||
| 1 | No 1 RV; 100 RPM | ||
Handling
Add 5-15% of FLAMERETARDER HWF, the percentage depends on the type, composition and density of the substrate and the required flame retardant standard.
Drying conditions: between 100 and 130°C (ventilated oven is suggested)
It is necessary a fixation step to obtain soak.
Resistance: 1'30 at 160°C or 3' at 150°C.
Storing
Keep the container well closed and protected form direct sunlight, at temperatures between 5 and 30°C.
Shelf life is 3 months.
| Mod. DT3002E | Creation date: 11/26/2004 | Revision: 1 | Revision date: 26 Nov 2004 |
Above information is reliable, but does not constitute warranty.
