Description
TACKSOL 10/83B is a solvent borne pressure sensitive adhesive, based on natural rubber and special resins, with very good performances. It displays a very good resistance to ageing and heat.
Application
TACKSOL 10/83B can be applied on any substrate (paper, PET, PP, PE, PVC, ...).
It is particolarly suitable for the production of protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 22±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 4000 - 100001 |
| Solvents | hexane | ||
| Notes | |||
| 1 | N. 4 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,000 |
| 17 | Rolling Ball Tack | cm | 4 |
| 97 | Loop Tack Test | g | 1,500 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
The product has to be cured with isocyanate (e.g. CURING AGENT D or CURING AGENT RF/AEDE). When increased heat or mechanical resistance is required. In this case the pot-life of the adhesive is reduced as crosslinking starts immediately after the addition of the curing agent. The amount of isocyanate depends on the final requested characteristics.
Packaging
The product is supplied in iron drums (145 kg); ADR compliant IBC containers (750 kg).
Storing
Use within 12 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 1/21/2004 | Revision: 6 | Revision date: 29 Apr 2016 |
Above information is reliable, but does not constitute warranty.
