Description
PRIMER EPA W5 is a water-borne emulsion of synthetic polymers, which enhances the adherence of acrylic waterborne adhesives to polyolefinic films.
Application
PRIMER EPA W5 can be used as primer for corona treated PP and PE films. It prevents adhesive transfer after the Printing.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 50±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 30 - 2001 |
| 8 | pH | pH | 7.5 - 8.5 |
| Solvents | water | ||
| Notes | |||
| 1 | No 1 RV; 20 RPM | ||
Handling
PRIMER EPA W5 can be diluted with water and in some cases (depending upon the application method) thickened with polyacrylic thickening agents and ammonia.
Apply approx. 1 ÷ 1.5 g dry/sqm on corona treated films; standard coating methods (Mayer-bar, rotogravure, air knife, ...) are recommended.
Packaging
The product is supplied in plastic drums (50 kg); iron drums (150 kg); IBC containers (1000 kg).
Storing
Containers must be kept tightly sealed and protected from frost, heat and direct sunlight.
PRIMER EPA W5 must not be allowed to come into contact with metals or alloys that are susceptible to corrosion.
Product must be stored at temperatures between +5°C and +40°C.
Use within 9 months from production date (unopened and in the original packaging).
Notes
Stir well before use.
| Mod. DT3002E | Creation date: 11/4/2003 | Revision: 5 | Revision date: 14 Mar 2024 |
Above information is reliable, but does not constitute warranty.
ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
