Technical data sheet

Tackwhite A 65

Description

TACKWHITE A 65 is a water based acrylic pressure sensitive adhesive. The dried film has a very aggressive initial tack and a good cohesion.

Application

TACKWHITE A 65 is suitable for the production of pressure sensitive packaging and office tapes on BOPP films. By applying approximately 20-21 g/sqm dry weight, it yelds a good balance of peel and shear strength. It is supplied as a ready-to-use emulsion and it is suitable for most of today's modern coating machines.
Other prerogatives:
- Very aggressive initial tack
- Good adhesion
- Good properties coating low grammage

Technical Specifications

Method of analysisMUStandard
1Total Solids% 51±1
3Brookfield Viscosity 25°CmPa.s < 4001
8pHpH 8.5 - 9.5
 Solventswater
 Notes
1No 1 RV; 20 RPM

Film properties

Method of analysisMUStandard
11Peel Adhesion on Steelg/in 900
22Static Shearh > 200
97Loop Tack Testg 1,100
Average values; 22±2 g/m² of dry adhesive on PET film 36 µm

Packaging

The product is supplied in iron drums (200 kg); IBC containers (1000 kg).

Storing

For a safe storage of this emulsion, keep containers well sealed to prevent water evaporation and skin formation. The emulsion must be stored between 5-25°C. Freezing must be avoided.

Use within 6 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 3/6/2001Revision: 9Revision date: 16 Feb 2022
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
ISO 9001 14001 45001 Certified Management