Description
RELEASE W 20 BV is a water-based acrylic release agent.
Application
RELEASE W 20 BV can be applied on all porous substrates (i.e. Kraft paper for masking tape) as release agent in contact with hot-melt and solvent based adhesives.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 20±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 15 - 251 |
| 8 | pH | pH | 7 - 9 |
| Solvents | water | ||
| Notes | |||
| 1 | No 1 RV; 100 RPM | ||
Handling
The product can be applied by Mayer-bar, knife-coating, reverse-roll, etc., If necessary, it can be diluted with water or thickened with polyacrylic thickeners.
The quantity to be applied depends on the substrate and may vary from 1 to 3 g dry/sqm. In general, 1,5 g dry/sqm is considered optimal.
In order to obtain the highest releasing properties, we recommend to heat the product at 150°C for a few seconds. A self-curing process is triggered after the drying. Ageing properties are excellent.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
Keep material preferably at temperatures between +5°C and +40°C, despite a very good freeze stability.
Stir well before use.
Use within 9 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 7/29/1999 | Revision: 2 | Revision date: 2 May 2023 |
Above information is reliable, but does not constitute warranty.
