Description
ADDITIVE ST2/14 ECO is manufactured using only aliphatic solvents. The product is designed to be added to inks before printing PP acrylic, easy printable hot-melt and easy printable solvent borne PSA tapes. The product ADDITIVE ST2/14 ECO ensures ink anchorage and, at the same time, an easy unwinding of the adhesive tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 14±1 |
| Solvents | octane / isopropyl alcohol | ||
Handling
ADDITIVE ST2/14 ECO must be added to COLOR INKS PP PAMC or similar polyamidic inks for PP, in the following quantities:
55 pp of COLOR INK PP PAMC
45 pp of ADDITIVE ST2/14 ECO
The amount of ADDITIVE ST2/14 ECO must be calibrated depending upon the pigment.
Before using ADDITIVE ST2/14 ECO ensure that the product is fluid and homogeneous. In case of partial or total solidification, store the product in a heated place (25-30 °C) and stir till complete homogeneity.
Even the system ink-additive must be completely liquid and homogeneous. We recommend a working temperature of 25-30°C.
Packaging
The product is supplied in iron drums (40 kg).
Storing
If stored at temperatures lower than 18°C, ADDITIVE ST2/14 ECO becomes solid. This effect is reversible: it is enough to heat and stir the product to reverse this phenomena.
Use within 12 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 11/24/1998 | Revision: 3 | Revision date: 23 Jul 2015 |
Above information is reliable, but does not constitute warranty.
