PRINTABLE RELEASE COAT FOR DOUBLE CORONA TREATED POLYOLEPHYNIC SOLVENT RUBBER ADHESIVE TAPES
RELEASE ST10 DIL. 5 TA is a solution of synthetic resins in a blend of toluene and isopropyl alcohol.
RELEASE ST10 DIL. 5 TA is designed to replace the normal release coat (Release PP 25S or RELEASE K100D) in the production of BOPP adhesive packaging tapes, for the production of tapes printable with a single-step printing machine (similar to PVC tapes, without using primer and release), using only suitable inks (see notes below).
Method of analysis | MU | Standard | |
---|---|---|---|
1 | Total Solids | % | 5±1 |
Solvents | toluene / isopropyl alcohol |
The best performance has been obtained with 0.25-0.3 g (dry)/sqm coating weight. Concentration shall be adjusted depending on the coating system. For standard applications, we suggest diluting with octane/isopropyl alcohol (70/30) or toluene/isopropyl alcohol (70/30) at 6% and coating 4-5 g (wet)/sqm on flame treated BOPP film (minimum 42 dynes/cm).
Application temperature of the solution shall preferably be between 30 and 40°C, and never below 20°C. Stir well before use. Coating must be perfectly dry (less than 0.6 g/sqm of residual solvent).
Solvent rubber adhesives can be coated directly on line on the other treated side of the BOPP film.
The product is supplied in ADR compliant IBC containers (850 kg).
Use within 12 months from production date (unopened and in the original packaging).
Ichemco can supply a wide range of compatible polyamide inks (COLOR INK PP PAM + ADD and ECO INK PAM RU series - one component inks, ready to use). See our web site (www.ichemco.it/inks) for a full list. The printing machine must use specific settings (we suggest to contact SIAT SPA), e.g. the larger cylinder (opposite to the printing rolls) must be heated at 40-50°C. Before printing, brush off the surface with a felt to activate the surface by friction.
Mod. DT3002E | Creation date: 3/26/2024 | Revision: 1 | Revision date: 26 Mar 2024 |