SOLACRIL 44 is a solvent borne acrylic pressure sensitive adhesive. Very clear, it has good tack and high peel adhesion.
SOLACRIL 44 is suitable for application on plastic materials, such as PP, PE, PET, acetate, etc., and on various substrates like paper, PU foams, fabrics, non woven, synthetic leather, etc.
Method of analysis | MU | Standard | |
---|---|---|---|
Solvents | ethylacetate / toluene | ||
1 | Total Solids | % | |
• | SOLACRIL 44 | 50±1 | |
3 | Brookfield Viscosity 25°C | mPa.s | |
• | SOLACRIL 44 | 4,000 - 7,0001 | |
Notes | |||
1 | N. 4 RV; 20 RPM |
11 | Peel Adhesion on Steel | g/in | |
• | SOLACRIL 44 | 1,2001 | |
17 | Rolling Ball Tack | cm | |
• | SOLACRIL 44 | > 201 | |
97 | Loop Tack Test | g | |
• | SOLACRIL 44 | 7001 | |
Notes | |||
1 | without crosslinker | ||
Average values; 22±2 g/m² of dry adhesive on PET film 36 µm |
The product is ready to use and can be applied with traditional coating systems: rotating blade or reverse roll. Diluted, it can be applied by Mayer bar, rotogravure.
If a crosslinker has been added, a perfect drying is necessary to fully complete the crosslinking process.
Store in a cool place, protected from direct sunlight and heat sources, at temperatures between +5 and +40°C. Keep material in tightly closed containers to prevent loss of solvent.
SOLACRIL 44 is approved for skin contact in compliance with ISO 10993-3 and ISO 10993-10.
Mod. DT3002E | Creation date: 2/4/1997 | Revision: 9 | Revision date: 12 Sep 2016 |