PRIMER PU6 is a water borne polyester-based aliphatic polyurethane binder.
PRIMER PU6 is suggested as adhesion promoter and top coat for printing on plastic surfaces.
Method of analysis | MU | Standard | |
---|---|---|---|
1 | Total Solids | % | 35±1 |
3 | Brookfield Viscosity 25°C | mPa.s | < 3001 |
8 | pH | pH | 7 - 9 |
Solvents | water | ||
Notes | |||
1 | No 1 RV; 20 RPM |
PRIMER PU6 can be diluted with water and, if necessary, thickened with THICKENER SL 6103 and ammonia.
To increase the anchorage it can be cured with polyurea (CURING AGENT WS 5) or isocyanates (CURING AGENT W4). If cured with isocyanates, pot-life is shorter. Suggested amount of crosslinker: 1-2%.
Apply approx. 0.3 ÷ 0.5 g dry/sqm; traditional coating methods are suggested: Mayer-bar, rotogravure, air knife,...
The product is supplied in plastic drums (120 kg); IBC containers (1000 kg).
Protect from freezing. PRIMER PU6 must be stored at temperatures between +5°C and +35°C.
Use within 6 months from production date (unopened and in the original packaging).
Mod. DT3002E | Creation date: 3/7/2023 | Revision: 1 | Revision date: 7 Mar 2023 |