Technical data sheet

Solacril 205

(Provisional)

Description

SOLACRIL 205 is a solvent borne acrylic pressure sensitive adhesive, with a high tack and peel. Cohesion and tack can be adjusted by supplementary addition of crosslinker.

Application

SOLACRIL 205 is recommended for the production of protective and removable films.

 

Technical Specifications

Method of analysisMUStandard
1Total Solids% 41±1
3Brookfield Viscosity 25°CmPa.s 2,500 - 4,5001
 Solventsethylacetate
 Notes
1N. 4 RV; 20 RPM

Handling

As crosslinker a polymeric isocyanate (e.g. CURING AGENT CH) is recommended. Low peel adhesion values can only be achieved by the addition of the crosslinker. Peel adhesion values are inversely proportional to the amount of crosslinker. The concentration depends on the coating weight and on the specific application; it ranges from 0,2 to 1,5%.  Reaction starts immediately, so it is recommended to use the product after activation. We suggest to check in advance the curing conditions. Use anhydrous solvents to dilute SOLACRIL 205 to avoid interference with the crosslinker.

Packaging

The product is supplied in iron drums (180 kg).

Storing

Store in a cool place, protected from direct sunlight and heat sources, at temperatures between +5 and +40°C. Keep material in tightly closed containers to prevent loss of solvent.

Use within 6 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 6/16/2021Revision: 2Revision date: 21 Nov 2023
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1
- www.ichemco.it
ISO 9001 14001 45001 Certified Management