RELEASE K 10 HL 4555 is a release agent dissolved in toluene.
The product is designed to be used as a very efficient release agent for adhesive tapes in polypropylene, polyethylene, PVC, reinforced PVC, polyester. It can be used with solvent rubber, hot-melt and acrylic adhesives. The product has been developed to have a slightly higher unwinding force in comparison to our reference product RELEASE K 100 D.
Method of analysis | MU | Standard | |
---|---|---|---|
1 | Total Solids | % | 10±0.50 |
Solvents | toluene |
Before taking any quantity from the original drum, RELEASE K 10 HL 4555 should be heated at about +40°/+50°C and stirred till fluidity and transparency are completely restored. The products tends to become a gel at temperatures below +30°C. Also its diluted solutions tend to jellify and should be heated over +30°C and stirred till the final coating on the films.
Dilute with toluene at a concentration between 0.2 and 2% max, depending on coating method and on the desired result.
Coat 3-5 g (wet)/m² with gravure cylinder or mayer bar, dry it perfectly before winding the adhesive tape.
The product is supplied in iron drums (10 kg); iron drums (20 kg); iron drums (180 kg).
The product must be stored at temperatures higher than +18°C. Keep away from direct sunlight. Keep containers tightly closed to prevent solvent evaporation.
Use within 12 months from production date (unopened and in the original packaging).
Mod. DT3002E | Creation date: 5/26/2021 | Revision: 1 | Revision date: 26 May 2021 |