Description
TACKSOL 45 TRC is a solvent borne PSA formulated with natural rubber and syntetic resins. It is characterized by high peel adhesion and tack.
Application
Technical Specifications
| Method of analysis | MU | Standard |
|---|---|---|
| 1 Total Solids | % | 42±1 |
| 3 Brookfield Viscosity 25°C | mPa.s | 60,000 - 90,000 1 |
| Solvents | hexane | |
| 1 No 6 RV; 10 RPM | ||
Film properties
| Method of analysis | MU | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 2,000 |
| 22 Static Shear | h | > 15 |
| 97 Loop Tack Test | g | 1,500 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
TACKSOL 45 TRC can be applied directly on the substrate by air knife, so to avoid penetration of the adhesive into the substrate. Thermal and mechanical resistance can be increased by adding 0.5 - 1% of CURING AGENT D or CURING AGENT CH. Reaction starts immediately, so it is recommended to use the product after the activation. Pot-life of TACKSOL 45 TRC + crosslinker depends on crosslinker quantity and temperature. We suggest to check curing conditions in advance, in order to avoid any waste.
Packaging
The product is supplied in iron drums (145 kg).
Storing
The product must be stored between +5 and +30°C, far from heat sources. Keep containers well closed in order to prevent solvent evaporation.
Use within 12 months from production date (unopened and in the original packaging).