Technical data sheet

Solacril 303

(Provisional)

Description

SOLACRIL 303 is a solvent borne acrylic PSA, with a very good resistance to ageing, light and heat.

Application

SOLACRIL 303 can be applied on various substrates: paper, polyester, PP, PE, PVC, etc.
After curing it is recommended for protective films.

Technical Specifications

Method of analysisMUStandard
1Total Solids% 50±1
3Brookfield Viscosity 25°CmPa.s 3,000 - 7,0001
 Solventsethylacetate
 Notes
1N. 4 RV; 20 RPM

Film properties

Method of analysisMUStandard
11Peel Adhesion on Steelg/in 4501
97Loop Tack Testg 6501
 Notes
1Crosslinked with 0.3% of CURING AGENT CH
Average values; pilot plant coating at 1 m/min; 18±3 g/m² on PET film 23 µm, TCA-treated

Handling

SOLACRIL 303 must be activated before use, to increase adhesion to plastic films and to improve cohesion.
Suggested activators are: CURING AGENT CH, CURING AGENT D or RF/AEDE. Reaction starts immediately, so it is recommended to use the product after activation. The quantity of crosslinker depends on the coating weight and on the desired final properties, usually it is between 0.2 and 1.5%. We suggest to check in advance the curing conditions.

Packaging

The product is supplied in iron drums (200 kg); ADR compliant IBC containers (900 kg).

Storing

Store in a cool place, protected from direct sunlight and heat sources, at temperatures between +5 and +40°C. Keep material in tightly closed containers to prevent loss of solvent.

Use within 6 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 6/8/2016Revision: 2Revision date: 9 Sep 2020
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
ISO 9001 14001 45001 Certified Management