TACKWHITE AK 11 is a water borne pressure sensitive adhesive based on acrylic polymers.
It has a very good anchorage on corona treated polyolefin films.
The coated product has a very high resistance to plasticizers and its adhesive properties are stable after ageing.
TACKWHITE AK 11 is suggested for the production of film labels.
Method of analysis | MU | Standard | |
---|---|---|---|
1 | Total Solids | % | 50±1 |
8 | pH | pH | 7 - 8 |
Solvents | water | ||
3 | Brookfield Viscosity 25°C | mPa.s | |
• | TACKWHITE AK 11 | 150 - 4001 | |
• | TACKWHITE AK 11 (V500) | 400 - 5501 | |
Notes | |||
1 | No 1 RV; 20 RPM |
Method of analysis | MU | Standard | |
---|---|---|---|
11 | Peel Adhesion on Steel | g/in | 1,000 |
17 | Rolling Ball Tack | cm | 6 |
22 | Static Shear | h | > 50 |
97 | Loop Tack Test | g | 900 |
Average values; 22±2 g/m² of dry adhesive on PET film 36 µm |
The product can be applied by Mayer bar or reverse roll.
If necessary, it can be thickened with a suitable acrylic based thickener.
The product is supplied in plastic drums (225 kg); IBC containers (1050 kg).
TACKWHITE AK 11 must be stored at temperature between +5°C and +30°C.
Protect from freeze.
Use within 6 months from production date (unopened and in the original packaging).
Mod. DT3002E | Creation date: 8/31/2015 | Revision: 5 | Revision date: 17 Jan 2024 |