Description
RELEASE W 40 GP1 is a water-borne product based on acrylic dispersions, modified with special additives and ink receptors.
Application
RELEASE W 40 GP1 is designed to be applied on paper as a printable (via off-set) and writable release coat.
Technical Specifications
| 1 | Total Solids | % | |
| • | RELEASE W 40 GP1 | 40±1 | |
| 3 | Brookfield Viscosity 25°C | mPa.s | |
| • | RELEASE W 40 GP1 | 1,500 - 3,5001 | |
| 8 | pH | pH | |
| • | RELEASE W 40 GP1 | 8.5 - 9.5 | |
| Notes | |||
| 1 | N. 4 RV; 20 RPM | ||
Handling
Apply on paper, possibly after dilution. Quantity to be applied is quite variable, also depending upon the porosity of the substrate: normally we suggest from 1 to 3 g / m² dry.
Self crosslinking is achieved by drying the coating at 150°C for few seconds.
Storing
Keep material at temperatures between +5°C and +40°C; avoid direct sunlight/freezing.
When stored for over one month, it is necessary to stir the product slowly for 10 - 15 minutes before usage.
| Mod. DT3002E | Creation date: 12/12/2014 | Revision: 2 | Revision date: 5 Sep 2017 |
Above information is reliable, but does not constitute warranty.
ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
