Technical data sheet

Tacksol 45 TR

Description

TACKSOL 45 TR is a solvent borne PSA formulated with natural rubber and syntetic  resins. It is characterized by high peel adhesion and tack.


Application

TACKSOL 45 TR has been developed for application on textiles and  other porous substrates.

Technical Specifications

Method of analysisMUStandard
1Total Solids% 42±1
3Brookfield Viscosity 25°CmPa.s 80,000 - 200,0001
 Solventshexane
 Notes
1No 6 RV; 10 RPM

Film properties

Method of analysisMUStandard
11Peel Adhesion on Steelg/in 2,000
22Static Shearh > 15
97Loop Tack Testg 2,600
Average values; 22±2 g/m² of dry adhesive on PET film 36 µm

Handling

TACKSOL 45 TR can be applied directly on the substrate by air knife, so to avoid penetration of the adhesive into the substrate. Thermal and mechanical resistance can be increased by adding 0.5 - 1% of CURING AGENT D or CURING AGENT CH. Reaction starts immediately, so it is recommended to use the product after the activation. Pot-life of TACKSOL 45 TR + crosslinker depends on crosslinker quantity and temperature. We suggest to check curing conditions in advance, in order to avoid any waste.

Packaging

The product is supplied in iron drums (145 kg).

Storing

The product must be stored between +5 and +30°C, far from heat sources. Keep containers well closed in order to prevent solvent evaporation.

Use within 12 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 6/29/2010Revision: 3Revision date: 26 Oct 2016
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1 - Fax: +39 02 97243.200
- internet: www.ichemco.it
ISO 9001 14001 45001 Certified Management