Description
TACKSOL 10/86 EPM is a solvent borne pressure sensitive adhesive, based on natural rubber and special resins. It displays a good wettability on various substrates.
Application
TACKSOL 10/86 EPM can be applied on any substrate (paper, PET, PP, PE, PVC).
It is a soft adhesive and is reccomended for the production of protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 17±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 300 - 7001 |
| Solvents | heptane | ||
| Notes | |||
| 1 | No 1 RV; 10 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 500 |
| 17 | Rolling Ball Tack | cm | 7 |
| 97 | Loop Tack Test | g | 1,200 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
TACKSOL 10/86 EPM can be diluted with aliphatic and aromatic solvents in order to achieve the desired viscosity. For protective tapes it is necessary to cure the product with CURING AGENT RF/AEDE (0.5 - 2%); in this case, the pot-life of the adhesive is reduced as crosslinking starts immediately after the addition of the curing agent.
Packaging
The product is supplied in iron drums (145 kg).
Storing
Store at temperatures between +5 and + 40°C in well closed containers. Keep far from heat sources and direct sunlight.
Use within 12 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 10/8/2008 | Revision: 4 | Revision date: 23 May 2017 |
Above information is reliable, but does not constitute warranty.
