Technical data sheet

Celloprimer S

(Provisional)

Description

CELLOPRIMER S is a primer for cellophane films.

Application

CELLOPRIMER S is used to bond the adhesive mass (based on natual or synthetic rubber) to the film, without activation or film pre-treatment.

It can be used for PSA films, for packaging or technical uses.

Technical Specifications

Method of analysisMUStandard
1Total Solids% 9±1
 Solventsethylacetate

Handling

CELLOPRIMER S must be cured with 1 - 1,5% of CURING AGENT D before coating.                            The pot-life is reduced as crosslinking starts immediately after the addition of the curing agent and depends on the amount of crosslinker and on the temperature.
Dilution: the product can be diluted with ethyl acetate.                                                                            Recommended coating weight: 1,0 - 1,5 g/sqm dry.

Packaging

The product is supplied in Iron drums (20 kg); iron drums (180 kg).

Storing

Store at temperatures between +10 and +40°C, keep container well cloed to prevent solvent evaporation.

Stir well before use.

Use within 12 months from production date (unopened and in the original packaging).

Mod. DT3002ECreation date: 2/20/2008Revision: 2Revision date: 8 Nov 2024
Above information is reliable, but does not constitute warranty.

ICHEMCO srl
via 11 Settembre, 5 - 20012 CUGGIONO (MI) - ITALY
Phone: +39 02 97243.1
- www.ichemco.it
ISO 9001 14001 45001 Certified Management