Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tacksol 10/86 HT |
Description
TACKSOL 10/86 HT is a solvent pressure sensitive adhesive, based on natural rubber and special resins. It has a good wettability on various substrates.
Application
TACKSOL 10/86 HT can be applied on any substrate (paper, polyester, PP, PE, PVC.
It is a soft adhesive and is suggested for the production of protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 30±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 2,000 - 6,0001 |
| Solvents | hexane | ||
| Notes | |||
| 1 | N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,000 - 1,300 |
| 17 | Rolling Ball Tack | cm | 0.5 - 3 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | > 100 |
Handling
TACKSOL 10/86 HT can be diluted with aliphatic and aromatic solvents to obtain the correct viscosity. For protective tapes it is necessary to cure the product with CURING AGENT D (0,5 - 1%), remembering that pot-life of the adhesive is reduced to a maximum of 24 hours.
Packing
TACKSOL 10/86 HT is supplied in 200 litres (about 140 kg net) iron drums.
Storing
Shelf life is 6 months.