Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tacksol 10/85 HST |
Description
TACKSOL 10/85 HST is a solvent pressure sensitive adhesive, based on natural and synthetic rubbers and special resins, with elevated characteristics. It has very good resistance to ageing, light and heat, much more than normal adhesives based on natural rubbers.
Application
TACKSOL 10/85 HST can be applied on any substrate (paper, polyester, PP, PE, PVC).
Production: protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 25±2 |
| 3 | Brookfield Viscosity 25°C | cps | 15,000 - 30,0001 |
| Solvents | toluene / hexane | ||
| Notes | |||
| 1 | No 6 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 750 |
| 17 | Rolling Ball Tack | cm | 2 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | > 100 |
Handling
Heat or mechanical resistance can be increased by the addition of 0.5 - 1% of CURING AGENT D or RF/AE ; pot-life of the adhesive in that case is reduced to a maximum of 24 hours.
Packing
TACKSOL 10/85 HST is supplied in 200 litres (about 150 kg net) iron drums.
Storing
Shelf life is 6 months.