Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Solacril 203 |
Description
SOLACRIL 203 is a solvent based acrylic PSA, with a very good resistance to ageing, light and heat.
Application
SOLACRIL 203 can be applied on various substrates: paper, polyester, PP, PE, PVC, etc.
It is particularly suitable for protective films.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 40±2 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 1,500 - 3,0001 |
| Solvents | ethylacetate | ||
| Notes | |||
| 1 | No 3 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 600 - 8001 |
| 97 | Loop Tack Test | g/in | 500 |
| Notes | |||
| 1 | product not activated | ||
Handling
SOLACRIL 203 must be activated before use, to increase adhesion to plastic films and to improve cohesion.
Suggested activators are: CURING AGENT D or RF/AE, recommended concentration is 0.5 - 1.5%. After activation, pot-life is 24 hours.
Packing
SOLACRIL 203 is supplied in 200 l drums (net weight approximately 180 kg ).
Storing
Product must be stored at temperatures between +5°C and +40°C.
If stored in original packaging, shelf life is 6 months.