Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tacksol 10/86 |
Description
TACKSOL 10/86 is a solvent pressure sensitive adhesive, based on natural rubber and special resins. After curing, it develops very good resistance to ageing, light and heat.
Application
TACKSOL 10/86 can be applied on any substrate (paper, polyester, PP, PE, PVC,...).
This product is suggested for the production of protective p.s. films and tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 20±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 2,000 - 10,0001 |
| Solvents | hexane | ||
| Notes | |||
| 1 | No 4 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 800 - 1,100 |
| 17 | Rolling Ball Tack | cm | 2 - 4 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | > 100 |
Handling
When heat or mechanical resistance must be increased, 0,5 - 1% of CURING AGENT D should be added, remembering that pot-life of the adhesive in that case is reduced to a maximum of 24 hours.
Packing
TACKSOL 10/86 is supplied in 200 litres (about 140 kg net) iron drums.
Storing
Shelf life is 6 months.