Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tacksol IS 56M2 |
Description
TACKSOL IS 56M2 is a solvent based, pressure sensitive adhesive with very high peel adhesion. It has a very high total solids content with a relatively low viscosity.
Application
TACKSOL IS 56M2 can be applied on any substrate (paper, polyester, PP, PE, PVC). Suggested uses: when high shear at room temperature and high adhesivity and heat resistance are required.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 58±2 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 5,000 - 15,0001 |
| Solvents | toluene / isopropyl alcohol | ||
| Notes | |||
| 1 | N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,800 - 2,800 |
| 17 | Rolling Ball Tack | cm | 6 - 10 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | > 200 |
Handling
TACKSOL IS 56M2 can be coated with rotating knife or knife-over-roll.
Primerisation with specific primers is suggested when a higher adhesion to plastic films is needed (please see ICHEMCO Primer catalogue).
The product can be added with pigment masterbatches for rubber adhesives.
Packing
TACKSOL IS 56 M2 is supplied in 200 l iron drums (about 150 Kg net).
Storing
Product must be stored in a ventilated and dry place. Avoid flames presence.
Shelf life is 6 months.