Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Vinilsol 10 |
Description
VINILSOL 10 is a solvent compound, designed as primer for PVC pressure sensitive tapes.
It contains rubbers and resins in an optimal ratio, to produce a very good adhesion to the PVC film (rigid/plasticized) and to the rubber based adhesives.
Application
Coat with approx. 10 - 12 g wet/sqm of this solution, by Meyer-bar or reverse roll or rotogravure.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 10±1 |
| 3 | Brookfield Viscosity 25°C | cps | 50 - 2001 |
| Notes | |||
| 1 | No 1 RV; 50 RPM | ||
Handling
Before use, VINILSOL 10 must be well stirred. For the cross-linking of coated adhesive, add to 100 parts of this solution 1 to 1,5 pp of isocyanate, like CURING AGENT RF/AE or CURING AGENT D (Ichemco).
Pot-life will be 24 hours after this addition.
Packing
VINILSOL 10 is supplied in 200 l drums.
Storing
Product must be stored in a ventilated and dry place.
Shelf life is 6 months.