Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tackmelt HM 10 A |
Description
TACKMELT HM 10 A is a hot-melt adhesive, based on thermoplastic rubbers and resins.
It contains special antioxidants to guarantee a good ageing resistance.
TACKMELT HM 10 A has a very high tack and peel adhesion, with an excellent cohesion.
Application
The product can be used for the production of dielectric tapes.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 4 | Softening Point, Ring & Ball | °C | 98 - 103 |
| 106 | Viscosity at 150 °C | mPa.s | 25,000 - 35,0001 |
| 107 | Viscosity at 160 °C | mPa.s | 16,000 - 26,0001 |
| 108 | Viscosity at 170°C | mPa.s | 12,000 - 18,0001 |
| 109 | Viscosity at 180°C | mPa.s | 8,000 - 12,0001 |
| 110 | Viscosity at 185 °C | mPa.s | 5,000 - 10,0001 |
| Notes | |||
| 1 | Brookfield viscometer, No 27 RV | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 3,000 |
| 17 | Rolling Ball Tack | cm | 3 |
| 96 | Shear of Hot Melt Adhesives1 | °C | 101 |
| Notes | |||
| 1 | secondo il metodo ASTM D4498-00 | ||
Handling
TACKMELT HM 10 A must be heated at 150-170°C with a suitable heating tool and kept at a set stable temperature during all the usage time (temperature changes cause a variation of the viscosity and, consequently, of the processing condition).
The best coating system is slot-die coating.
The product has been designed to resist to high temperature, but it is preferable to avoid thermal shocks.
Packing
TACKMELT HM 10 A is supplied in 4 kg blocks packed in carton boxes of 16 Kg, or in drums.
Storing
Keep the product at temperatures between +5 and +35°C. Avoid contact with dust, liquids,...
Shelf life is 1 year.