Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Tacksol IS 58 |
Description
TACKSOL IS 58 is a solvent based, pressure sensitive adhesive with very high peel adhesion. It has a very high total solids content.
Application
TACKSOL IS 58 can be applied on any substrate (paper, polyester, PP, PE, PVC). Suggested uses: when high peel and high adhesivity are required.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 63±2 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 3,000 - 5,0001 |
| Solvents | toluene | ||
| Notes | |||
| 1 | No 3 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 2,500 - 3,500 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | 200 - 300 |
Handling
TACKSOL IS 58 can be coated with rotating knife or knife-over-roll.
Primerisation with specific primers is suggested when a higher adhesion to plastic films is needed (please see ICHEMCO Primer catalogue).
The product can be added with pigment masterbatches for rubber adhesives.
Packing
TACKSOL IS 58 is supplied in 200 l iron drums (about 150 Kg net).
Storing
Product must be stored in a ventilated and dry place. Avoid flames presence.
Shelf life is 6 months.