Order this product
|
Printable version (PDF)
Order this product |
Technical data sheet |
| Solacril 758 |
Description
SOLACRIL 758 is a self cross-linking acrylic pressure sensitive adhesive in aliphatic solvents (ethylacetate and cycloexane) with a good tack, high peel adhesion and shear adhesion, it has also a very good fastness to sunlight.
Application
SOLACRIL 758, when coated on plastic films (PVC, PET, cellulose acetate), is suitable for the production of industrial pressure sensitive adhesives tapes and decals.
It can be applied also on paper, PU foams, fabrics, leather and non wovens.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 50±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 2,000 - 4,0001 |
| Solvents | ethylacetate / cyclohexane | ||
| Notes | |||
| 1 | No 4 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,600 - 1,800 |
| 17 | Rolling Ball Tack | cm | 2 - 4 |
| 22 | Holding Power of Pressure Sensitive Tapes | h | > 200 |
| 39 | Holding Power of Pressure Sensitive Tapes (PSTC-7) | h | > 241 |
| Notes | |||
| 1 | at 70°C | ||
Handling
SOLACRIL 758 is supplied ready for coating by rotating blade or direct knife coating systems. Diluted, it can be applied by reverse roll, Mayer bar. A perfect drying is necessary to fully complete cross-linking.
Packing
SOLACRIL 758 is supplied in non-returnable 180 kg steel drums.
Storing
Keep material in tightly closed containers. Maintain container full to prevent loss of solvent. Store in a cool place, preferably below 40°C.
If stored at these conditions, shelf-life is 6 months.